Motech LPS 305 User Manual download pdf (Page 9)

3. GETTING STARTED

3.1 Front panel controls and output terminals

Note：most soft keys have two functions. The first function of the key is function entry (i.e. + Vset, -Iset,

Tracking etc.)The second function for the soft keys is data entry (ji. E. 0~9).

REFER TO THE FIGURE A.

(1) LCD display : Displays alphanumeric information with status annunciators. A detailed

listing of descriptions is presented in section 3.2.

(2) Power on/off : Powers on the unit.

(3) + Vset(7) : + output control key used to display or alter the present voltage setting.

Numeric entry key for number seven.

(4) + lset (8) : + output control key used to display or alter the present voltage setting.

Numeric entry key for number seven.

(5) + ▲ (up) (9) : + output control key used to increase the voltage settings when the supply is

in the CV mode or the current settings when the supply is in the CC mode. It

will change voltage or current by 10mV, or 1mA respectively. If the key is

pressed and held, it will continually increase the setting until it is released.

Numeric entry key for number nine,

(6) + ▼ (down) : + output control key used to decrease the voltage settings when the

supply is in the CV mode or the current settings when the supply is in the

CC mode by 10mV or 1mA per step. If the key is pressed and held, it will

continually decrease the setting until it is released,

(7) - Vset (4) : - output control key used to display or alter the present voltage setting.

Numeric entry key for number four.

(8) - Iset (5) : - output control key used to display or alter the present voltage setting.

Numeric entry key for number five.

(9) - ▲ (up) (6) : - output control key. The function is as same as positive channel.

Numeric entry key for number six.

(10) - ▼ (down) : - output control key. The function is as same as positive channel.

(11) TRACK(1) : Mode control key which toggles the tracking mode on or off.

(12) “0” : Numeric entry key for zero.

(13) 5V/3.3V(2) : 5V or 3.3V output selecting key.

Numeric entry key for number two.

(14) ”.” : 5V or 3.3V output control key which toggles the output on or off. Decimal

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

No comments

Motech LPS 305 User Manual Page 9