Motech LPS 305 User Manual download pdf (Page 17)

Step 8: Measure the DC current from –output terminals ( - and COM) with the DMM and keyin the

measured value (i.e. if the DMM shows 0.642A then keyin 0.642) followed by the “ENTER”

key.

The following message will then appear on the LCD:

Step 9: Repeat step 8. Keyin the measured value (i.e. if the DMM shows 2.418A, then keyin 2.418)

followed by the “ENTER” key. The following message will then appear on the LCD：

ADC GET=00200

INDEP

-I Lo=0.624

TRACK

3.3V

ADC GET=02503

INDEP

-I Hi=2.418

TRACK

3.3V

MOTECH LPS 305

INDEP

Version 1.17

TRACK

3.3V

ALL OUTPUT OFF

INDEP

10.00V -10.00V

TRACK

3.3V

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

No comments

Motech LPS 305 User Manual Page 17